@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

File name: min_action_chain.feature

Relative path: secondary/min_action_chain.feature

Scenarios

Chart

Status

Progress

Passed	100.00 %
Failed	0.00 %

Total duration:

00:10:33.706

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Log in as admin user

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

When I enable repository "test_repo_rpm_pool" on this "sle_minion" 00:00:00.838

And I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:00.954

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:00.873

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:01.987

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:01.947

And I refresh the metadata for "sle_minion" 00:00:01.021

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.088

And I wait until refresh package list on "sle_minion" is finished 00:00:14.315

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:08.500

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.656

When I follow "Software" in the content area 00:00:00.098

And I follow "List / Remove" in the content area 00:00:00.098

And I enter "andromeda-dummy" as the filtered package name 00:00:00.209

And I click on the filter button until page does contain "andromeda-dummy-1.0" text 00:00:00.292

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.228

And I follow "errata-cache-default" 00:00:01.147

And I follow "errata-cache-bunch" 00:00:00.311

And I click on "Single Run Schedule" 00:00:01.345

Then I should see a "bunch was scheduled" text 00:00:00.278

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:01:08.334

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain" via API 00:00:00.965

And I follow the left menu "Schedule > Action Chains" 00:00:00.215

Then I should see a "salt_minion_action_chain" text 00:00:00.072

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a patch installation to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.555

When I follow "Software" in the content area 00:00:00.100

And I follow "Patches" in the content area 00:00:00.091

And I enter "andromeda" as the filtered synopsis 00:00:00.072

And I click on the filter button 00:00:00.607

And I check "andromeda-dummy-6789" in the list 00:00:00.085

And I click on "Apply Patches" 00:00:00.627

And I check radio button "schedule-by-action-chain" 00:00:10.102

And I click on "Confirm" 00:00:00.805

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.080

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package removal to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.557

When I follow "Software" in the content area 00:00:00.076

And I follow "List / Remove" in the content area 00:00:00.085

And I enter "milkyway-dummy" as the filtered package name 00:00:00.231

And I click on the filter button 00:00:00.904

And I check row with "milkyway-dummy" and arch of "sle_minion" 00:00:00.080

And I click on "Remove Packages" 00:00:00.668

And I check radio button "schedule-by-action-chain" 00:00:10.079

And I click on "Confirm" 00:00:00.585

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.070

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package installation to an action chain on Salt minion

When I follow "Software" in the content area 00:00:00.084

And I follow "Install New Packages" in the content area 00:00:00.086

And I enter "virgo-dummy" as the filtered package name 00:00:00.174

And I click on the filter button 00:00:00.804

And I check "virgo-dummy" in the list 00:00:00.075

And I click on "Install Packages" 00:00:00.674

And I check radio button "schedule-by-action-chain" 00:00:10.084

And I click on "Confirm" 00:00:00.677

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.068

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.179

And I follow "Create Config Channel" 00:00:00.253

And I enter "Action Chain Channel" as "cofName" 00:00:00.095

And I enter "actionchainchannel" as "cofLabel" 00:00:00.087

And I enter "This is a test channel" as "cofDescription" 00:00:00.086

And I click on "Create Config Channel" 00:00:00.628

Then I should see a "Action Chain Channel" text 00:00:00.071

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.090

And I follow "Action Chain Channel" 00:00:00.491

And I follow "Create Configuration File or Directory" 00:00:00.473

And I enter "/etc/action-chain.cnf" as "cffPath" 00:00:00.092

And I enter "Testchain=YES_PLEASE" in the editor 00:00:00.006

And I click on "Create Configuration File" 00:00:00.668

Then I should see a "Revision 1 of /etc/action-chain.cnf from channel Action Chain Channel" text 00:00:00.113

And I should see a "Update Configuration File" button 00:00:00.026

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Download the configuration file from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.089

And I follow "Action Chain Channel" 00:00:00.407

And I follow "List/Remove Files" 00:00:00.371

And I follow "/etc/action-chain.cnf" 00:00:00.411

And I follow "Download File" 00:00:00.192

And I wait until file "/tmp/downloads/action-chain.cnf" exists on "localhost" 00:00:00.187

Then file "/tmp/downloads/action-chain.cnf" should contain "Testchain=YES_PLEASE" on "localhost" 00:00:00.359

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.610

When I follow "Configuration" in the content area 00:00:00.099

And I follow "Manage Configuration Channels" in the content area 00:00:00.086

And I follow first "Subscribe to Channels" in the content area 00:00:00.092

And I check "Action Chain Channel" in the list 00:00:00.073

And I click on "Continue" 00:00:00.746

And I click on "Update Channel Rankings" 00:00:00.937

Then I should see a "Channel Subscriptions successfully changed for" text 00:00:00.091

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file deployment to the action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.167

And I follow "Action Chain Channel" 00:00:00.539

And I follow "Deploy Files" in the content area 00:00:00.090

And I click on "Deploy All Files" 00:00:00.662

And I check the "sle_minion" client 00:00:00.084

And I click on "Confirm & Deploy to Selected Systems" 00:00:00.700

And I check radio button "schedule-by-action-chain" 00:00:10.100

And I click on "Deploy Files to Selected Systems" 00:00:00.801

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.076

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add apply highstate to action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.811

When I follow "States" in the content area 00:00:00.103

And I check radio button "schedule-by-action-chain" 00:00:10.090

And I click on "Apply Highstate" 00:00:00.084

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a reboot action to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:02.043

When I follow first "Schedule System Reboot" 00:00:00.646

And I check radio button "schedule-by-action-chain" 00:00:10.110

And I click on "Reboot system" 00:00:00.906

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.099

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

When I follow "Details" in the content area 00:00:00.092

And I follow "Remote Command" in the content area 00:00:00.124

And I enter as remote command this script in

#!/bin/bash
touch /tmp/action_chain_one_system_done

00:00:00.089

And I check radio button "schedule-by-action-chain" 00:00:10.073

And I click on "Schedule" 00:00:00.586

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.089

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Verify the action chain list on Salt minion

When I follow "Schedule" 00:00:00.302

And I follow "Action Chains" 00:00:00.332

And I follow "salt_minion_action_chain" 00:00:00.499

Then I should see a "1. Apply patch(es) andromeda-dummy-6789 on 1 system" text 00:00:00.119

And I should see a "2. Remove milkyway-dummy from 1 system" text 00:00:00.090

And I should see a "3. Install or update virgo-dummy on 1 system" text 00:00:00.087

And I should see a text like "4. Deploy.*/etc/action-chain.cnf.*to 1 system" 00:00:00.090

And I should see a "5. Apply Highstate" text 00:00:00.086

And I should see a "6. Reboot 1 system" text 00:00:00.089

And I should see a "7. Run a remote command on 1 system" text 00:00:00.087

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Check that a different user cannot see the action chain for Salt minion

Given I am authorized as "testing" with password "testing" 00:00:02.610

When I follow "Schedule" 00:00:01.588

And I follow "Action Chains" 00:00:00.345

Then I should not see a "salt_minion_action_chain" link 00:00:00.010

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Execute the action chain from the web UI on Salt minion

Given I am authorized for the "Admin" section 00:00:02.508

When I am on the Systems overview page of this "sle_minion" 00:00:02.082

And I follow "Schedule" 00:00:00.299

And I follow "Action Chains" 00:00:00.244

And I follow "salt_minion_action_chain" 00:00:00.300

And I click on "Save and Schedule" 00:00:00.079

Then I should see a "Action Chain salt_minion_action_chain has been scheduled for execution." text 00:00:00.652

When I wait for "virgo-dummy" to be installed on "sle_minion" 00:00:30.030

And I wait at most 300 seconds until file "/tmp/action_chain_one_system_done" exists on "sle_minion" 00:04:05.408

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain_to_delete" via API 00:00:01.030

And I follow the left menu "Schedule > Action Chains" 00:00:00.103

Then I should see a "salt_minion_action_chain_to_delete" text 00:00:00.075

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.633

When I follow "Remote Command" 00:00:00.488

And I enter as remote command this script in

#!/bin/bash
uptime

00:00:00.077

And I check radio button "schedule-by-action-chain" 00:00:10.091

And I click on "Schedule" 00:00:00.574

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.097

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Delete the action chain for Salt minion

When I follow "Schedule" 00:00:00.308

And I follow "Action Chains" 00:00:00.253

And I follow "salt_minion_action_chain_to_delete" 00:00:00.307

And I follow "Delete Action Chains" in the content area 00:00:00.105

And I click on "Delete" 00:00:00.440

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Downgrade again repositories to lower version on Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:02.785

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:01.938

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:02.216

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.707

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.729

And I wait until refresh package list on "sle_minion" is finished 00:00:12.675

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:09.288

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Ensure again the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.186

And I follow "errata-cache-default" 00:00:01.205

And I follow "errata-cache-bunch" 00:00:01.211

And I click on "Single Run Schedule" 00:00:01.341

Then I should see a "bunch was scheduled" text 00:00:00.278

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:23.876

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add operations to the action chain via API for Salt minions

Given I want to operate on this "sle_minion" 00:00:00.995

When I create an action chain with label "salt_minion_api_chain" via API 00:00:00.980

And I add a package install to the action chain via API 00:00:02.092

And I add a package removal to the action chain via API 00:00:02.297

And I add a package upgrade to the action chain via API 00:00:02.141

And I add the script "exit 1;" to the action chain via API 00:00:01.073

And I add a system reboot to the action chain via API 00:00:01.051

Then I should be able to see all these actions in the action chain via API 00:00:01.015

+ Show Info

Running actions:
	- Package Install/Upgrade
	- System reboot
	- Package Removal
	- Package Install/Upgrade
	- Run an arbitrary script

When I remove each action within the chain via API 00:00:05.911

+ Show Info

	- Removed "Package Install/Upgrade" action
	- Removed "System reboot" action
	- Removed "Package Removal" action
	- Removed "Package Install/Upgrade" action
	- Removed "Run an arbitrary script" action

Then the current action chain should be empty 00:00:01.035

And I delete the action chain via API 00:00:00.998

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Run an action chain via API on Salt minion

Given I want to operate on this "sle_minion" 00:00:00.951

When I create an action chain with label "salt_minion_multiple_scripts" via API 00:00:00.937

And I add the script "echo -n 1 >> /tmp/action_chain.log" to the action chain via API 00:00:00.967

And I add the script "echo -n 2 >> /tmp/action_chain.log" to the action chain via API 00:00:01.058

And I add the script "echo -n 3 >> /tmp/action_chain.log" to the action chain via API 00:00:01.062

And I add the script "touch /tmp/action_chain_done" to the action chain via API 00:00:01.019

Then I should be able to see all these actions in the action chain via API 00:00:00.963

+ Show Info

Running actions:
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script

When I schedule the action chain via API 00:00:01.063

And I wait until there are no more action chains listed via API 00:00:00.974

And I wait until file "/tmp/action_chain_done" exists on "sle_minion" 00:00:04.073

Then file "/tmp/action_chain.log" should contain "123" on "sle_minion" 00:00:00.926

When I wait until there are no more scheduled actions listed via API 00:00:00.956

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove Salt minion from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.239

And I follow "Action Chain Channel" 00:00:00.557

And I follow "Systems" in the content area 00:00:00.097

And I check the "sle_minion" client 00:00:00.102

And I click on "Unsubscribe systems" 00:00:00.555

Then I should see a "Successfully unsubscribed 1 system(s)." text 00:00:00.073

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove configuration channel for Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.081

And I follow "Action Chain Channel" 00:00:00.407

And I follow "Delete Channel" 00:00:00.275

And I click on "Delete Config Channel" 00:00:00.076

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:02.120

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:01.061

And I remove package "milkyway-dummy" from this "sle_minion" without error control 00:00:02.026

And I disable repository "test_repo_rpm_pool" on this "sle_minion" without error control 00:00:00.511

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

When I run "rm -f /tmp/action_chain.log" on "sle_minion" without error control 00:00:00.497

And I run "rm -f /tmp/action_chain_done" on "sle_minion" without error control 00:00:00.528

And I run "rm -f /etc/action-chain.cnf" on "sle_minion" without error control 00:00:00.661

And I run "rm -f /tmp/action_chain_one_system_done" on "sle_minion" without error control 00:00:00.667

@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

Scenarios

Scenario: Log in as admin user

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a patch installation to the action chain on Salt minion

Scenario: Add a package removal to the action chain on Salt minion

Scenario: Add a package installation to an action chain on Salt minion

Scenario: Create a configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

Scenario: Download the configuration file from configuration channel

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file deployment to the action chain on Salt minion

Scenario: Add apply highstate to action chain on Salt minion

Scenario: Add a reboot action to the action chain on Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Verify the action chain list on Salt minion

Scenario: Check that a different user cannot see the action chain for Salt minion

Scenario: Execute the action chain from the web UI on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Delete the action chain for Salt minion

Scenario: Downgrade again repositories to lower version on Salt minion

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

Scenario: Ensure again the errata cache is computed before testing on Salt minion

Scenario: Add operations to the action chain via API for Salt minions

Scenario: Run an action chain via API on Salt minion

Scenario: Cleanup: remove Salt minion from configuration channel

Scenario: Cleanup: remove configuration channel for Salt minion

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

Scenario: Cleanup: remove downloaded files