@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

File name: min_action_chain.feature

Relative path: secondary/min_action_chain.feature

Scenarios

Chart

Status

Progress

Passed	100.00 %
Failed	0.00 %

Total duration:

00:09:44.023

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Log in as admin user

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

When I enable repository "test_repo_rpm_pool" on this "sle_minion" 00:00:00.850

And I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:00.979

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:01.045

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:02.137

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.247

And I refresh the metadata for "sle_minion" 00:00:01.113

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.489

And I wait until refresh package list on "sle_minion" is finished 00:00:12.369

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:08.315

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.544

When I follow "Software" in the content area 00:00:00.076

And I follow "List / Remove" in the content area 00:00:00.064

And I enter "andromeda-dummy" as the filtered package name 00:00:00.148

And I click on the filter button until page does contain "andromeda-dummy-1.0" text 00:00:00.280

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.154

And I follow "errata-cache-default" 00:00:01.201

And I follow "errata-cache-bunch" 00:00:00.398

And I click on "Single Run Schedule" 00:00:01.231

Then I should see a "bunch was scheduled" text 00:00:00.264

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:28.654

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain" via API 00:00:00.966

And I follow the left menu "Schedule > Action Chains" 00:00:00.165

Then I should see a "salt_minion_action_chain" text 00:00:00.062

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a patch installation to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.536

When I follow "Software" in the content area 00:00:00.069

And I follow "Patches" in the content area 00:00:00.064

And I enter "andromeda" as the filtered synopsis 00:00:00.051

And I click on the filter button 00:00:10.106

And I check "andromeda-dummy-6789" in the list 00:00:00.058

And I click on "Apply Patches" 00:00:00.600

And I check radio button "schedule-by-action-chain" 00:00:10.060

And I click on "Confirm" 00:00:00.753

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.076

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package removal to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.514

When I follow "Software" in the content area 00:00:00.074

And I follow "List / Remove" in the content area 00:00:00.063

And I enter "milkyway-dummy" as the filtered package name 00:00:00.211

And I click on the filter button 00:00:01.143

And I check row with "milkyway-dummy" and arch of "sle_minion" 00:00:00.057

And I click on "Remove Packages" 00:00:00.589

And I check radio button "schedule-by-action-chain" 00:00:10.059

And I click on "Confirm" 00:00:00.749

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.059

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package installation to an action chain on Salt minion

When I follow "Software" in the content area 00:00:00.069

And I follow "Install New Packages" in the content area 00:00:00.063

And I enter "virgo-dummy" as the filtered package name 00:00:00.094

And I click on the filter button 00:00:00.606

And I check "virgo-dummy" in the list 00:00:00.055

And I click on "Install Packages" 00:00:00.578

And I check radio button "schedule-by-action-chain" 00:00:10.058

And I click on "Confirm" 00:00:00.656

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.061

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.124

And I follow "Create Config Channel" 00:00:00.316

And I enter "Action Chain Channel" as "cofName" 00:00:00.067

And I enter "actionchainchannel" as "cofLabel" 00:00:00.061

And I enter "This is a test channel" as "cofDescription" 00:00:00.062

And I click on "Create Config Channel" 00:00:00.062

Then I should see a "Action Chain Channel" text 00:00:00.640

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.062

And I follow "Action Chain Channel" 00:00:00.361

And I follow "Create Configuration File or Directory" 00:00:00.306

And I enter "/etc/action-chain.cnf" as "cffPath" 00:00:00.067

And I enter "Testchain=YES_PLEASE" in the editor 00:00:00.004

And I click on "Create Configuration File" 00:00:00.063

Then I should see a "Revision 1 of /etc/action-chain.cnf from channel Action Chain Channel" text 00:00:00.096

And I should see a "Update Configuration File" button 00:00:00.017

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Download the configuration file from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.057

And I follow "Action Chain Channel" 00:00:00.434

And I follow "List/Remove Files" 00:00:00.295

And I follow "/etc/action-chain.cnf" 00:00:00.393

And I follow "Download File" 00:00:00.172

And I wait until file "/tmp/downloads/action-chain.cnf" exists on "localhost" 00:00:00.184

Then file "/tmp/downloads/action-chain.cnf" should contain "Testchain=YES_PLEASE" on "localhost" 00:00:00.334

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.542

When I follow "Configuration" in the content area 00:00:00.071

And I follow "Manage Configuration Channels" in the content area 00:00:00.068

And I follow first "Subscribe to Channels" in the content area 00:00:00.065

And I check "Action Chain Channel" in the list 00:00:00.060

And I click on "Continue" 00:00:00.750

And I click on "Update Channel Rankings" 00:00:00.784

Then I should see a "Channel Subscriptions successfully changed for" text 00:00:00.073

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file deployment to the action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.109

And I follow "Action Chain Channel" 00:00:00.427

And I follow "Deploy Files" in the content area 00:00:00.063

And I click on "Deploy All Files" 00:00:00.637

And I check the "sle_minion" client 00:00:00.056

And I click on "Confirm & Deploy to Selected Systems" 00:00:00.892

And I check radio button "schedule-by-action-chain" 00:00:10.069

And I click on "Deploy Files to Selected Systems" 00:00:00.822

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.069

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add apply highstate to action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.914

When I follow "States" in the content area 00:00:00.066

And I check radio button "schedule-by-action-chain" 00:00:10.064

And I click on "Apply Highstate" 00:00:00.059

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a reboot action to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:02.476

When I follow first "Schedule System Reboot" 00:00:00.563

And I check radio button "schedule-by-action-chain" 00:00:10.051

And I click on "Reboot system" 00:00:00.786

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.086

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

When I follow "Details" in the content area 00:00:00.071

And I follow "Remote Command" in the content area 00:00:00.066

And I enter as remote command this script in

#!/bin/bash
touch /tmp/action_chain_one_system_done

00:00:00.062

And I check radio button "schedule-by-action-chain" 00:00:10.058

And I click on "Schedule" 00:00:00.058

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.185

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Verify the action chain list on Salt minion

When I follow "Schedule" 00:00:00.252

And I follow "Action Chains" 00:00:00.262

And I follow "salt_minion_action_chain" 00:00:00.569

Then I should see a "1. Apply patch(es) andromeda-dummy-6789 on 1 system" text 00:00:00.094

And I should see a "2. Remove milkyway-dummy from 1 system" text 00:00:00.082

And I should see a "3. Install or update virgo-dummy on 1 system" text 00:00:00.080

And I should see a text like "4. Deploy.*/etc/action-chain.cnf.*to 1 system" 00:00:00.077

And I should see a "5. Apply Highstate" text 00:00:00.081

And I should see a "6. Reboot 1 system" text 00:00:00.081

And I should see a "7. Run a remote command on 1 system" text 00:00:00.080

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Check that a different user cannot see the action chain for Salt minion

Given I am authorized as "testing" with password "testing" 00:00:02.418

When I follow "Schedule" 00:00:00.877

And I follow "Action Chains" 00:00:00.316

Then I should not see a "salt_minion_action_chain" link 00:00:00.007

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Execute the action chain from the web UI on Salt minion

Given I am authorized for the "Admin" section 00:00:02.364

When I am on the Systems overview page of this "sle_minion" 00:00:02.101

And I follow "Schedule" 00:00:00.259

And I follow "Action Chains" 00:00:00.258

And I follow "salt_minion_action_chain" 00:00:00.227

And I click on "Save and Schedule" 00:00:00.058

Then I should see a "Action Chain salt_minion_action_chain has been scheduled for execution." text 00:00:00.713

When I wait for "virgo-dummy" to be installed on "sle_minion" 00:00:29.981

And I wait at most 300 seconds until file "/tmp/action_chain_one_system_done" exists on "sle_minion" 00:04:01.444

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain_to_delete" via API 00:00:00.988

And I follow the left menu "Schedule > Action Chains" 00:00:00.072

Then I should see a "salt_minion_action_chain_to_delete" text 00:00:00.071

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.567

When I follow "Remote Command" 00:00:00.576

And I enter as remote command this script in

#!/bin/bash
uptime

00:00:00.054

And I check radio button "schedule-by-action-chain" 00:00:10.069

And I click on "Schedule" 00:00:00.056

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.190

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Delete the action chain for Salt minion

When I follow "Schedule" 00:00:00.248

And I follow "Action Chains" 00:00:00.278

And I follow "salt_minion_action_chain_to_delete" 00:00:00.313

And I follow "Delete Action Chains" in the content area 00:00:00.073

And I click on "Delete" 00:00:00.445

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Downgrade again repositories to lower version on Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:02.923

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:02.067

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:02.341

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.621

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.026

And I wait until refresh package list on "sle_minion" is finished 00:00:13.959

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:07.529

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Ensure again the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.128

And I follow "errata-cache-default" 00:00:00.395

And I follow "errata-cache-bunch" 00:00:01.257

And I click on "Single Run Schedule" 00:00:01.261

Then I should see a "bunch was scheduled" text 00:00:00.277

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:17.577

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add operations to the action chain via API for Salt minions

Given I want to operate on this "sle_minion" 00:00:00.932

When I create an action chain with label "salt_minion_api_chain" via API 00:00:00.973

And I add a package install to the action chain via API 00:00:02.101

And I add a package removal to the action chain via API 00:00:01.927

And I add a package upgrade to the action chain via API 00:00:01.967

And I add the script "exit 1;" to the action chain via API 00:00:00.961

And I add a system reboot to the action chain via API 00:00:00.976

Then I should be able to see all these actions in the action chain via API 00:00:00.980

+ Show Info

Running actions:
	- System reboot
	- Run an arbitrary script
	- Package Install/Upgrade
	- Package Install/Upgrade
	- Package Removal

When I remove each action within the chain via API 00:00:05.876

+ Show Info

	- Removed "System reboot" action
	- Removed "Run an arbitrary script" action
	- Removed "Package Install/Upgrade" action
	- Removed "Package Install/Upgrade" action
	- Removed "Package Removal" action

Then the current action chain should be empty 00:00:00.914

And I delete the action chain via API 00:00:00.918

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Run an action chain via API on Salt minion

Given I want to operate on this "sle_minion" 00:00:00.927

When I create an action chain with label "salt_minion_multiple_scripts" via API 00:00:00.931

And I add the script "echo -n 1 >> /tmp/action_chain.log" to the action chain via API 00:00:00.943

And I add the script "echo -n 2 >> /tmp/action_chain.log" to the action chain via API 00:00:00.948

And I add the script "echo -n 3 >> /tmp/action_chain.log" to the action chain via API 00:00:00.938

And I add the script "touch /tmp/action_chain_done" to the action chain via API 00:00:00.955

Then I should be able to see all these actions in the action chain via API 00:00:00.975

+ Show Info

Running actions:
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script

When I schedule the action chain via API 00:00:01.087

And I wait until there are no more action chains listed via API 00:00:01.112

And I wait until file "/tmp/action_chain_done" exists on "sle_minion" 00:00:03.907

Then file "/tmp/action_chain.log" should contain "123" on "sle_minion" 00:00:00.871

When I wait until there are no more scheduled actions listed via API 00:00:00.937

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove Salt minion from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.155

And I follow "Action Chain Channel" 00:00:00.428

And I follow "Systems" in the content area 00:00:00.079

And I check the "sle_minion" client 00:00:00.063

And I click on "Unsubscribe systems" 00:00:00.536

Then I should see a "Successfully unsubscribed 1 system(s)." text 00:00:00.062

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove configuration channel for Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.061

And I follow "Action Chain Channel" 00:00:00.396

And I follow "Delete Channel" 00:00:00.286

And I click on "Delete Config Channel" 00:00:00.057

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:01.808

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:00.941

And I remove package "milkyway-dummy" from this "sle_minion" without error control 00:00:01.917

And I disable repository "test_repo_rpm_pool" on this "sle_minion" without error control 00:00:00.528

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

When I run "rm -f /tmp/action_chain.log" on "sle_minion" without error control 00:00:00.648

And I run "rm -f /tmp/action_chain_done" on "sle_minion" without error control 00:00:00.570

And I run "rm -f /etc/action-chain.cnf" on "sle_minion" without error control 00:00:00.712

And I run "rm -f /tmp/action_chain_one_system_done" on "sle_minion" without error control 00:00:00.668

@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

Scenarios

Scenario: Log in as admin user

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a patch installation to the action chain on Salt minion

Scenario: Add a package removal to the action chain on Salt minion

Scenario: Add a package installation to an action chain on Salt minion

Scenario: Create a configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

Scenario: Download the configuration file from configuration channel

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file deployment to the action chain on Salt minion

Scenario: Add apply highstate to action chain on Salt minion

Scenario: Add a reboot action to the action chain on Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Verify the action chain list on Salt minion

Scenario: Check that a different user cannot see the action chain for Salt minion

Scenario: Execute the action chain from the web UI on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Delete the action chain for Salt minion

Scenario: Downgrade again repositories to lower version on Salt minion

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

Scenario: Ensure again the errata cache is computed before testing on Salt minion

Scenario: Add operations to the action chain via API for Salt minions

Scenario: Run an action chain via API on Salt minion

Scenario: Cleanup: remove Salt minion from configuration channel

Scenario: Cleanup: remove configuration channel for Salt minion

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

Scenario: Cleanup: remove downloaded files