@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Feature: 0064 - Salt SSH action chain

File name: minssh_action_chain.feature

Relative path: secondary/minssh_action_chain.feature

Scenarios

Chart

Status

Progress

Passed	93.33 %
Failed	6.67 %

Total duration:

00:11:00.160

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Log in as org admin user

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Pre-requisite: downgrade repositories to lower version on SSH minion

When I enable repository "test_repo_rpm_pool" on this "ssh_minion" 00:00:00.858

And I remove package "andromeda-dummy" from this "ssh_minion" without error control 00:00:01.724

And I remove package "virgo-dummy" from this "ssh_minion" without error control 00:00:01.638

And I install package "milkyway-dummy" on this "ssh_minion" without error control 00:00:01.439

And I install old package "andromeda-dummy-1.0" on this "ssh_minion" 00:00:01.790

And I refresh the metadata for "ssh_minion" 00:00:00.953

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Pre-requisite: refresh package list and check newly installed packages on SSH minion

When I refresh packages list via spacecmd on "ssh_minion" 00:00:08.823

And I wait until refresh package list on "ssh_minion" is finished 00:00:24.444

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "ssh_minion" 00:00:09.188

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Pre-requisite: wait until downgrade is finished on SSH minion

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.597

When I follow "Software" in the content area 00:00:00.075

And I follow "List / Remove" in the content area 00:00:00.069

And I enter "andromeda-dummy" as the filtered package name 00:00:00.234

And I click on the filter button until page does contain "andromeda-dummy-1.0" text 00:00:00.604

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Pre-requisite: ensure the errata cache is computed before testing on SSH minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.190

And I follow "errata-cache-default" 00:00:01.223

And I follow "errata-cache-bunch" 00:00:01.347

And I click on "Single Run Schedule" 00:00:01.274

Then I should see a "bunch was scheduled" text 00:00:00.581

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:00.884

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Create a custom action chain for the SSH minion

When I create an action chain with label "minssh_action_chain" via API 00:00:01.146

And I follow the left menu "Schedule > Action Chains" 00:00:00.151

Then I wait until I see "minssh_action_chain" text 00:00:00.169

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a patch installation to the action chain on SSH minion

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.551

When I follow "Software" in the content area 00:00:00.076

And I follow "Patches" in the content area 00:00:00.068

And I enter "andromeda" as the filtered synopsis 00:00:00.054

And I click on the filter button 00:00:10.117

And I check "andromeda-dummy-6789" in the list 00:00:00.062

And I click on "Apply Patches" 00:00:00.824

And I check radio button "schedule-by-action-chain" 00:00:10.061

And I click on "Confirm" 00:00:00.605

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.188

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a package removal to the action chain on SSH minion

When I follow "Software" in the content area 00:00:00.074

And I follow "List / Remove" in the content area 00:00:00.067

And I enter "milkyway-dummy" as the filtered package name 00:00:00.168

And I click on the filter button 00:00:00.844

And I check row with "milkyway-dummy" and arch of "ssh_minion" 00:00:00.061

And I click on "Remove Packages" 00:00:00.685

And I check radio button "schedule-by-action-chain" 00:00:10.064

And I click on "Confirm" 00:00:00.602

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.157

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a package installation to an action chain on SSH minion

When I follow "Software" in the content area 00:00:00.070

And I follow "Install New Packages" in the content area 00:00:00.067

And I enter "virgo-dummy" as the filtered package name 00:00:00.106

And I click on the filter button 00:00:00.645

And I check "virgo-dummy" in the list 00:00:00.057

And I click on "Install Packages" 00:00:00.626

And I check radio button "schedule-by-action-chain" 00:00:10.052

And I click on "Confirm" 00:00:00.601

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.187

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Create a configuration channel for testing action chain on SSH minion

When I follow the left menu "Configuration > Channels" 00:00:00.141

And I follow "Create Config Channel" 00:00:00.225

And I enter "Action Chain Channel" as "cofName" 00:00:00.072

And I enter "actionchainchannel" as "cofLabel" 00:00:00.069

And I enter "This is a test channel" as "cofDescription" 00:00:00.071

And I click on "Create Config Channel" 00:00:00.664

Then I should see a "Action Chain Channel" text 00:00:00.164

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a configuration file to configuration channel for testing action chain on SSH minion

When I follow the left menu "Configuration > Channels" 00:00:00.069

And I follow "Action Chain Channel" 00:00:00.368

And I follow "Create Configuration File or Directory" 00:00:00.356

And I enter "/etc/action-chain.cnf" as "cffPath" 00:00:00.075

And I enter "Testchain=YES_PLEASE" in the editor 00:00:00.004

And I click on "Create Configuration File" 00:00:00.642

Then I should see a "Revision 1 of /etc/action-chain.cnf from channel Action Chain Channel" text 00:00:00.229

And I should see a "Update Configuration File" button 00:00:00.021

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Subscribe system to configuration channel for testing action chain on SSH minion

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.667

When I follow "Configuration" in the content area 00:00:00.077

And I follow "Manage Configuration Channels" in the content area 00:00:00.072

And I follow first "Subscribe to Channels" in the content area 00:00:00.070

And I check "Action Chain Channel" in the list 00:00:00.059

And I click on "Continue" 00:00:00.696

And I click on "Update Channel Rankings" 00:00:00.977

Then I should see a "Channel Subscriptions successfully changed for" text 00:00:00.196

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a configuration file deployment to the action chain on SSH minion

When I follow the left menu "Configuration > Channels" 00:00:00.121

And I follow "Action Chain Channel" 00:00:00.463

And I follow "Deploy Files" in the content area 00:00:00.069

And I click on "Deploy All Files" 00:00:00.641

And I check the "ssh_minion" client 00:00:00.062

And I click on "Confirm & Deploy to Selected Systems" 00:00:00.654

And I check radio button "schedule-by-action-chain" 00:00:10.069

And I click on "Deploy Files to Selected Systems" 00:00:00.798

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.170

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add apply highstate to action chain on SSH minion

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.693

When I follow "States" in the content area 00:00:00.073

And I check radio button "schedule-by-action-chain" 00:00:10.084

And I click on "Apply Highstate" 00:00:00.062

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a reboot action to the action chain on SSH minion

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.815

When I follow first "Schedule System Reboot" 00:00:00.499

And I check radio button "schedule-by-action-chain" 00:00:10.058

And I click on "Reboot system" 00:00:00.818

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.215

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a remote command to the action chain on SSH minion

When I follow "Details" in the content area 00:00:00.081

When I follow "Remote Command" in the content area 00:00:00.069

And I enter as remote command this script in

#!/bin/bash
touch /tmp/action_chain_one_system_done

00:00:00.071

And I check radio button "schedule-by-action-chain" 00:00:10.059

And I click on "Schedule" 00:00:00.065

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.659

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Verify the action chain list on SSH minion

When I follow the left menu "Schedule > Action Chains" 00:00:00.151

And I follow "minssh_action_chain" 00:00:00.244

Then I should see a "1. Apply patch(es) andromeda-dummy-6789 on 1 system" text 00:00:00.206

And I should see a "2. Remove milkyway-dummy from 1 system" text 00:00:00.223

And I should see a "3. Install or update virgo-dummy on 1 system" text 00:00:00.191

And I should see a text like "4. Deploy.*/etc/action-chain.cnf.*to 1 system" 00:00:00.086

And I should see a "5. Apply Highstate" text 00:00:00.193

And I should see a "6. Reboot 1 system" text 00:00:00.198

And I should see a "7. Run a remote command on 1 system" text 00:00:00.197

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Check that a different user cannot see the action chain for SSH minion

Given I am authorized as "testing" with password "testing" 00:00:02.034

When I follow the left menu "Schedule > Action Chains" 00:00:00.122

Then I should not see a "minssh_action_chain" link 00:00:00.009

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Execute the action chain from the web UI on SSH minion

Given I am authorized for the "Admin" section 00:00:02.264

When I follow the left menu "Schedule > Action Chains" 00:00:00.122

And I wait until I see "minssh_action_chain" text 00:00:00.147

And I follow "minssh_action_chain" 00:00:00.384

Then I click on "Save and Schedule" 00:00:00.060

And I should see a "Action Chain minssh_action_chain has been scheduled for execution." text 00:00:00.784

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Verify that the action chain was executed successfully

1
1
Duration: 00:05:54.565

When I wait for "virgo-dummy" to be installed on "ssh_minion" 00:00:54.565

And I wait at most 300 seconds until file "/tmp/action_chain_one_system_done" exists on "ssh_minion" 00:05:00.000

+ Show Error + Screenshot

execution expired (Timeout::Error)
./features/support/commonlib.rb:89:in `repeat_until_timeout'
./features/step_definitions/command_steps.rb:822:in `/^I wait at most (\d+) seconds until file "([^"]*)" exists on "([^"]*)"$/'
features/secondary/minssh_action_chain.feature:177:in `I wait at most 300 seconds until file "/tmp/action_chain_one_system_done" exists on "ssh_minion"'

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Create a custom action chain for the SSH minion

When I create an action chain with label "minssh_action_chain_to_delete" via API 00:00:01.041

And I follow the left menu "Schedule > Action Chains" 00:00:00.079

Then I should see a "minssh_action_chain_to_delete" text 00:00:00.155

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add a remote command to the action chain on SSH minion

1
5
Duration: 00:00:12.796

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.622

When I follow "Remote Command" 00:00:00.506

And I enter as remote command this script in

#!/bin/bash
uptime

00:00:00.057

And I check radio button "schedule-by-action-chain" 00:00:10.083

And I click on "Schedule" 00:00:00.062

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.464

+ Show Error + Screenshot

Unable to find xpath "/html" (Capybara::ElementNotFound)
./features/support/commonlib.rb:125:in `check_text?'
./features/step_definitions/navigation_steps.rb:691:in `/^I should see a "([^"]*)" text$/'
features/secondary/minssh_action_chain.feature:195:in `I should see a "Action has been successfully added to the Action Chain" text'

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Delete the action chain for SSH minion

When I follow the left menu "Schedule > Action Chains" 00:00:00.149

And I follow "minssh_action_chain_to_delete" 00:00:00.309

And I follow "Delete Action Chains" in the content area 00:00:00.092

Then I click on "Delete" 00:00:00.060

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Cleanup: roll back action chain effects on SSH minion

Given I am on the Systems overview page of this "ssh_minion" 00:00:01.980

When I run "rm /tmp/action_chain_done" on "ssh_minion" without error control 00:00:00.804

And I enable repository "test_repo_rpm_pool" on this "ssh_minion" 00:00:00.570

And I remove package "andromeda-dummy" from this "ssh_minion" without error control 00:00:02.068

And I remove package "virgo-dummy" from this "ssh_minion" without error control 00:00:01.620

And I install package "milkyway-dummy" on this "ssh_minion" without error control 00:00:01.820

And I install old package "andromeda-dummy-1.0" on this "ssh_minion" 00:00:01.731

And I follow "Software" in the content area 00:00:00.075

And I click on "Update Package List" 00:00:00.694

And I follow "Events" in the content area 00:00:00.074

And I wait until I do not see "Package List Refresh scheduled" text, refreshing the page 00:00:24.235

And I follow "Software" in the content area 00:00:00.068

And I follow "List / Remove" in the content area 00:00:00.071

And I enter "andromeda-dummy" as the filtered package name 00:00:00.170

And I click on the filter button until page does contain "andromeda-dummy-1.0" text 00:00:00.607

When I follow the left menu "Admin > Task Schedules" 00:00:00.173

And I follow "errata-cache-default" 00:00:01.421

And I follow "errata-cache-bunch" 00:00:01.100

And I click on "Single Run Schedule" 00:00:01.319

Then I should see a "bunch was scheduled" text 00:00:00.576

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:12.030

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Add operations to the action chain via API for SSH minions

Given I want to operate on this "ssh_minion" 00:00:00.987

When I create an action chain with label "minssh_api_chain" via API 00:00:00.963

And I add a package install to the action chain via API 00:00:02.022

And I add a package removal to the action chain via API 00:00:01.983

And I add a package upgrade to the action chain via API 00:00:02.077

And I add the script "exit 1;" to the action chain via API 00:00:00.985

Then I should be able to see all these actions in the action chain via API 00:00:01.098

+ Show Info

Running actions:
	- Run an arbitrary script
	- Package Install/Upgrade
	- Package Removal
	- Package Install/Upgrade

When I remove each action within the chain via API 00:00:05.191

+ Show Info

	- Removed "Run an arbitrary script" action
	- Removed "Package Install/Upgrade" action
	- Removed "Package Removal" action
	- Removed "Package Install/Upgrade" action

Then the current action chain should be empty 00:00:00.957

And I delete the action chain via API 00:00:00.953

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Run an action chain via API on SSH minion

And I want to operate on this "ssh_minion" 00:00:00.944

When I create an action chain with label "minssh_multiple_scripts" via API 00:00:00.951

And I add the script "echo -n 1 >> /tmp/action_chain.log" to the action chain via API 00:00:00.972

And I add the script "echo -n 2 >> /tmp/action_chain.log" to the action chain via API 00:00:00.962

And I add the script "echo -n 3 >> /tmp/action_chain.log" to the action chain via API 00:00:00.981

And I add the script "touch /tmp/action_chain_done" to the action chain via API 00:00:01.077

Then I should be able to see all these actions in the action chain via API 00:00:01.046

+ Show Info

Running actions:
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script

When I schedule the action chain via API 00:00:01.083

Then I wait until there are no more action chains listed via API 00:00:00.973

When I wait until file "/tmp/action_chain_done" exists on "ssh_minion" 00:00:26.597

Then file "/tmp/action_chain.log" should contain "123" on "ssh_minion" 00:00:00.922

When I wait until there are no more scheduled actions listed via API 00:00:00.967

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Cleanup: remove SSH minion from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.157

And I follow "Action Chain Channel" 00:00:00.448

And I follow "Systems" in the content area 00:00:00.088

And I check the "ssh_minion" client 00:00:00.067

And I click on "Unsubscribe systems" 00:00:00.754

Then I should see a "Successfully unsubscribed 1 system(s)." text 00:00:00.154

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Cleanup: remove configuration channel for SSH minion

When I follow the left menu "Configuration > Channels" 00:00:00.065

And I follow "Action Chain Channel" 00:00:00.439

And I follow "Delete Channel" 00:00:00.306

And I click on "Delete Config Channel" 00:00:00.061

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Cleanup: remove packages and repository used in action chain for SSH minion

When I remove package "andromeda-dummy" from this "ssh_minion" without error control 00:00:01.752

And I remove package "virgo-dummy" from this "ssh_minion" without error control 00:00:00.952

And I remove package "milkyway-dummy" from this "ssh_minion" without error control 00:00:01.694

And I disable repository "test_repo_rpm_pool" on this "ssh_minion" without error control 00:00:00.497

@skip_if_github_validation @ssh_minion @scope_action_chains @scope_salt_ssh

Scenario: Cleanup: remove temporary files for testing action chains on SSH minion

When I run "rm -f /tmp/action_chain.log" on "ssh_minion" without error control 00:00:00.461

And I run "rm -f /tmp/action_chain_done" on "ssh_minion" without error control 00:00:00.462

And I run "rm -f /etc/action-chain.cnf" on "ssh_minion" without error control 00:00:00.475

And I run "rm -f /tmp/action_chain_one_system_done" on "ssh_minion" without error control 00:00:00.470