@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

File name: min_action_chain.feature

Relative path: secondary/min_action_chain.feature

Scenarios

Chart

Status

Progress

Passed	100.00 %
Failed	0.00 %

Total duration:

00:10:11.959

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Log in as admin user

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

When I enable repository "test_repo_rpm_pool" on this "sle_minion" 00:00:00.827

And I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:00.955

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:00.982

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:02.149

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.192

And I refresh the metadata for "sle_minion" 00:00:01.337

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.746

And I wait until refresh package list on "sle_minion" is finished 00:00:14.363

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:08.546

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.676

When I follow "Software" in the content area 00:00:00.087

And I follow "List / Remove" in the content area 00:00:00.072

And I enter "andromeda-dummy" as the filtered package name 00:00:00.209

And I click on the filter button until page does contain "andromeda-dummy-1.0" text 00:00:00.290

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.171

And I follow "errata-cache-default" 00:00:01.257

And I follow "errata-cache-bunch" 00:00:01.236

And I click on "Single Run Schedule" 00:00:01.541

Then I should see a "bunch was scheduled" text 00:00:00.269

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:50.844

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain" via API 00:00:00.960

And I follow the left menu "Schedule > Action Chains" 00:00:00.179

Then I should see a "salt_minion_action_chain" text 00:00:00.064

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a patch installation to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.622

When I follow "Software" in the content area 00:00:00.079

And I follow "Patches" in the content area 00:00:00.072

And I enter "andromeda" as the filtered synopsis 00:00:00.057

And I click on the filter button 00:00:10.155

And I check "andromeda-dummy-6789" in the list 00:00:00.065

And I click on "Apply Patches" 00:00:00.644

And I check radio button "schedule-by-action-chain" 00:00:10.063

And I click on "Confirm" 00:00:01.091

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.075

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package removal to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.864

When I follow "Software" in the content area 00:00:00.084

And I follow "List / Remove" in the content area 00:00:00.068

And I enter "milkyway-dummy" as the filtered package name 00:00:00.187

And I click on the filter button 00:00:00.845

And I check row with "milkyway-dummy" and arch of "sle_minion" 00:00:00.064

And I click on "Remove Packages" 00:00:00.621

And I check radio button "schedule-by-action-chain" 00:00:10.059

And I click on "Confirm" 00:00:00.717

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.064

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package installation to an action chain on Salt minion

When I follow "Software" in the content area 00:00:00.079

And I follow "Install New Packages" in the content area 00:00:00.073

And I enter "virgo-dummy" as the filtered package name 00:00:00.145

And I click on the filter button 00:00:00.749

And I check "virgo-dummy" in the list 00:00:00.059

And I click on "Install Packages" 00:00:01.069

And I check radio button "schedule-by-action-chain" 00:00:10.074

And I click on "Confirm" 00:00:00.698

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.065

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.144

And I follow "Create Config Channel" 00:00:00.345

And I enter "Action Chain Channel" as "cofName" 00:00:00.077

And I enter "actionchainchannel" as "cofLabel" 00:00:00.071

And I enter "This is a test channel" as "cofDescription" 00:00:00.072

And I click on "Create Config Channel" 00:00:00.070

Then I should see a "Action Chain Channel" text 00:00:00.065

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.072

And I follow "Action Chain Channel" 00:00:00.509

And I follow "Create Configuration File or Directory" 00:00:00.415

And I enter "/etc/action-chain.cnf" as "cffPath" 00:00:00.079

And I enter "Testchain=YES_PLEASE" in the editor 00:00:00.006

And I click on "Create Configuration File" 00:00:00.742

Then I should see a "Revision 1 of /etc/action-chain.cnf from channel Action Chain Channel" text 00:00:00.101

And I should see a "Update Configuration File" button 00:00:00.020

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Download the configuration file from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.069

And I follow "Action Chain Channel" 00:00:00.465

And I follow "List/Remove Files" 00:00:00.384

And I follow "/etc/action-chain.cnf" 00:00:00.425

And I follow "Download File" 00:00:00.212

And I wait until file "/tmp/downloads/action-chain.cnf" exists on "localhost" 00:00:00.196

Then file "/tmp/downloads/action-chain.cnf" should contain "Testchain=YES_PLEASE" on "localhost" 00:00:00.347

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.688

When I follow "Configuration" in the content area 00:00:00.078

And I follow "Manage Configuration Channels" in the content area 00:00:00.072

And I follow first "Subscribe to Channels" in the content area 00:00:00.078

And I check "Action Chain Channel" in the list 00:00:00.061

And I click on "Continue" 00:00:00.650

And I click on "Update Channel Rankings" 00:00:00.772

Then I should see a "Channel Subscriptions successfully changed for" text 00:00:00.078

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file deployment to the action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.126

And I follow "Action Chain Channel" 00:00:00.517

And I follow "Deploy Files" in the content area 00:00:00.103

And I click on "Deploy All Files" 00:00:00.684

And I check the "sle_minion" client 00:00:00.067

And I click on "Confirm & Deploy to Selected Systems" 00:00:00.752

And I check radio button "schedule-by-action-chain" 00:00:10.088

And I click on "Deploy Files to Selected Systems" 00:00:00.743

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.075

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add apply highstate to action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.684

When I follow "States" in the content area 00:00:00.098

And I check radio button "schedule-by-action-chain" 00:00:10.081

And I click on "Apply Highstate" 00:00:00.064

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a reboot action to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.661

When I follow first "Schedule System Reboot" 00:00:00.518

And I check radio button "schedule-by-action-chain" 00:00:10.074

And I click on "Reboot system" 00:00:00.896

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.091

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

When I follow "Details" in the content area 00:00:00.084

And I follow "Remote Command" in the content area 00:00:00.077

And I enter as remote command this script in

#!/bin/bash
touch /tmp/action_chain_one_system_done

00:00:00.076

And I check radio button "schedule-by-action-chain" 00:00:10.058

And I click on "Schedule" 00:00:00.594

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.080

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Verify the action chain list on Salt minion

When I follow "Schedule" 00:00:00.270

And I follow "Action Chains" 00:00:00.286

And I follow "salt_minion_action_chain" 00:00:00.548

Then I should see a "1. Apply patch(es) andromeda-dummy-6789 on 1 system" text 00:00:00.098

And I should see a "2. Remove milkyway-dummy from 1 system" text 00:00:00.087

And I should see a "3. Install or update virgo-dummy on 1 system" text 00:00:00.082

And I should see a text like "4. Deploy.*/etc/action-chain.cnf.*to 1 system" 00:00:00.087

And I should see a "5. Apply Highstate" text 00:00:00.086

And I should see a "6. Reboot 1 system" text 00:00:00.082

And I should see a "7. Run a remote command on 1 system" text 00:00:00.081

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Check that a different user cannot see the action chain for Salt minion

Given I am authorized as "testing" with password "testing" 00:00:02.485

When I follow "Schedule" 00:00:01.236

And I follow "Action Chains" 00:00:00.339

Then I should not see a "salt_minion_action_chain" link 00:00:00.008

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Execute the action chain from the web UI on Salt minion

Given I am authorized for the "Admin" section 00:00:02.255

When I am on the Systems overview page of this "sle_minion" 00:00:02.274

And I follow "Schedule" 00:00:00.289

And I follow "Action Chains" 00:00:00.269

And I follow "salt_minion_action_chain" 00:00:00.306

And I click on "Save and Schedule" 00:00:00.072

Then I should see a "Action Chain salt_minion_action_chain has been scheduled for execution." text 00:00:00.805

When I wait for "virgo-dummy" to be installed on "sle_minion" 00:00:32.669

And I wait at most 300 seconds until file "/tmp/action_chain_one_system_done" exists on "sle_minion" 00:04:03.796

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain_to_delete" via API 00:00:01.637

And I follow the left menu "Schedule > Action Chains" 00:00:00.083

Then I should see a "salt_minion_action_chain_to_delete" text 00:00:00.066

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.730

When I follow "Remote Command" 00:00:00.532

And I enter as remote command this script in

#!/bin/bash
uptime

00:00:00.059

And I check radio button "schedule-by-action-chain" 00:00:10.064

And I click on "Schedule" 00:00:00.065

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.090

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Delete the action chain for Salt minion

When I follow "Schedule" 00:00:00.267

And I follow "Action Chains" 00:00:00.296

And I follow "salt_minion_action_chain_to_delete" 00:00:00.264

And I follow "Delete Action Chains" in the content area 00:00:00.087

And I click on "Delete" 00:00:00.426

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Downgrade again repositories to lower version on Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:02.961

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:01.992

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:02.212

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.631

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.614

And I wait until refresh package list on "sle_minion" is finished 00:00:14.151

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:09.428

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Ensure again the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.147

And I follow "errata-cache-default" 00:00:00.414

And I follow "errata-cache-bunch" 00:00:01.348

And I click on "Single Run Schedule" 00:00:01.292

Then I should see a "bunch was scheduled" text 00:00:00.296

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:06.694

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add operations to the action chain via API for Salt minions

Given I want to operate on this "sle_minion" 00:00:01.100

When I create an action chain with label "salt_minion_api_chain" via API 00:00:01.015

And I add a package install to the action chain via API 00:00:02.067

And I add a package removal to the action chain via API 00:00:02.049

And I add a package upgrade to the action chain via API 00:00:02.185

And I add the script "exit 1;" to the action chain via API 00:00:01.073

And I add a system reboot to the action chain via API 00:00:00.988

Then I should be able to see all these actions in the action chain via API 00:00:00.970

+ Show Info

Running actions:
	- Package Install/Upgrade
	- Package Install/Upgrade
	- Package Removal
	- Run an arbitrary script
	- System reboot

When I remove each action within the chain via API 00:00:06.094

+ Show Info

	- Removed "Package Install/Upgrade" action
	- Removed "Package Install/Upgrade" action
	- Removed "Package Removal" action
	- Removed "Run an arbitrary script" action
	- Removed "System reboot" action

Then the current action chain should be empty 00:00:00.998

And I delete the action chain via API 00:00:00.976

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Run an action chain via API on Salt minion

Given I want to operate on this "sle_minion" 00:00:01.076

When I create an action chain with label "salt_minion_multiple_scripts" via API 00:00:01.056

And I add the script "echo -n 1 >> /tmp/action_chain.log" to the action chain via API 00:00:01.012

And I add the script "echo -n 2 >> /tmp/action_chain.log" to the action chain via API 00:00:00.995

And I add the script "echo -n 3 >> /tmp/action_chain.log" to the action chain via API 00:00:00.980

And I add the script "touch /tmp/action_chain_done" to the action chain via API 00:00:00.977

Then I should be able to see all these actions in the action chain via API 00:00:00.960

+ Show Info

Running actions:
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script

When I schedule the action chain via API 00:00:01.050

And I wait until there are no more action chains listed via API 00:00:00.988

And I wait until file "/tmp/action_chain_done" exists on "sle_minion" 00:00:04.074

Then file "/tmp/action_chain.log" should contain "123" on "sle_minion" 00:00:00.950

When I wait until there are no more scheduled actions listed via API 00:00:01.082

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove Salt minion from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.174

And I follow "Action Chain Channel" 00:00:00.556

And I follow "Systems" in the content area 00:00:00.075

And I check the "sle_minion" client 00:00:00.076

And I click on "Unsubscribe systems" 00:00:00.649

Then I should see a "Successfully unsubscribed 1 system(s)." text 00:00:00.066

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove configuration channel for Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.068

And I follow "Action Chain Channel" 00:00:00.454

And I follow "Delete Channel" 00:00:00.321

And I click on "Delete Config Channel" 00:00:00.067

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:02.025

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:01.045

And I remove package "milkyway-dummy" from this "sle_minion" without error control 00:00:01.992

And I disable repository "test_repo_rpm_pool" on this "sle_minion" without error control 00:00:00.541

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

When I run "rm -f /tmp/action_chain.log" on "sle_minion" without error control 00:00:00.435

And I run "rm -f /tmp/action_chain_done" on "sle_minion" without error control 00:00:00.449

And I run "rm -f /etc/action-chain.cnf" on "sle_minion" without error control 00:00:00.471

And I run "rm -f /tmp/action_chain_one_system_done" on "sle_minion" without error control 00:00:00.519

@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

Scenarios

Scenario: Log in as admin user

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a patch installation to the action chain on Salt minion

Scenario: Add a package removal to the action chain on Salt minion

Scenario: Add a package installation to an action chain on Salt minion

Scenario: Create a configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

Scenario: Download the configuration file from configuration channel

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file deployment to the action chain on Salt minion

Scenario: Add apply highstate to action chain on Salt minion

Scenario: Add a reboot action to the action chain on Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Verify the action chain list on Salt minion

Scenario: Check that a different user cannot see the action chain for Salt minion

Scenario: Execute the action chain from the web UI on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Delete the action chain for Salt minion

Scenario: Downgrade again repositories to lower version on Salt minion

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

Scenario: Ensure again the errata cache is computed before testing on Salt minion

Scenario: Add operations to the action chain via API for Salt minions

Scenario: Run an action chain via API on Salt minion

Scenario: Cleanup: remove Salt minion from configuration channel

Scenario: Cleanup: remove configuration channel for Salt minion

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

Scenario: Cleanup: remove downloaded files