@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

File name: min_action_chain.feature

Relative path: secondary/min_action_chain.feature

Scenarios

Chart

Status

Progress

Passed	100.00 %
Failed	0.00 %

Total duration:

00:11:52.499

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Log in as admin user

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

When I enable repository "test_repo_rpm_pool" on this "sle_minion" 00:00:00.793

And I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:00.878

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:00.910

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:01.870

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.019

And I refresh the metadata for "sle_minion" 00:00:01.394

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:08.909

And I wait until refresh package list on "sle_minion" is finished 00:00:12.576

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:09.096

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.520

When I follow "Software" in the content area 00:00:00.076

And I follow "List / Remove" in the content area 00:00:00.065

And I enter "andromeda-dummy" as the filtered package name 00:00:00.183

And I click on the filter button until page does contain "andromeda-dummy-1.0" text 00:00:00.274

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.160

And I follow "errata-cache-default" 00:00:01.203

And I follow "errata-cache-bunch" 00:00:01.300

And I click on "Single Run Schedule" 00:00:01.506

Then I should see a "bunch was scheduled" text 00:00:00.267

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:01:29.070

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain" via API 00:00:01.263

And I follow the left menu "Schedule > Action Chains" 00:00:00.177

Then I should see a "salt_minion_action_chain" text 00:00:00.063

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a patch installation to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:02.158

When I follow "Software" in the content area 00:00:00.074

And I follow "Patches" in the content area 00:00:00.066

And I enter "andromeda" as the filtered synopsis 00:00:00.051

And I click on the filter button 00:00:10.072

And I check "andromeda-dummy-6789" in the list 00:00:00.062

And I click on "Apply Patches" 00:00:01.207

And I check radio button "schedule-by-action-chain" 00:00:10.084

And I click on "Confirm" 00:00:00.768

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.079

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package removal to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.682

When I follow "Software" in the content area 00:00:00.076

And I follow "List / Remove" in the content area 00:00:00.087

And I enter "milkyway-dummy" as the filtered package name 00:00:00.173

And I click on the filter button 00:00:00.816

And I check row with "milkyway-dummy" and arch of "sle_minion" 00:00:00.059

And I click on "Remove Packages" 00:00:00.664

And I check radio button "schedule-by-action-chain" 00:00:10.076

And I click on "Confirm" 00:00:00.589

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.063

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a package installation to an action chain on Salt minion

When I follow "Software" in the content area 00:00:00.072

And I follow "Install New Packages" in the content area 00:00:00.065

And I enter "virgo-dummy" as the filtered package name 00:00:00.125

And I click on the filter button 00:00:00.592

And I check "virgo-dummy" in the list 00:00:00.054

And I click on "Install Packages" 00:00:00.580

And I check radio button "schedule-by-action-chain" 00:00:10.060

And I click on "Confirm" 00:00:00.576

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.065

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.131

And I follow "Create Config Channel" 00:00:00.268

And I enter "Action Chain Channel" as "cofName" 00:00:00.071

And I enter "actionchainchannel" as "cofLabel" 00:00:00.065

And I enter "This is a test channel" as "cofDescription" 00:00:00.070

And I click on "Create Config Channel" 00:00:00.590

Then I should see a "Action Chain Channel" text 00:00:00.060

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.071

And I follow "Action Chain Channel" 00:00:00.359

And I follow "Create Configuration File or Directory" 00:00:00.331

And I enter "/etc/action-chain.cnf" as "cffPath" 00:00:00.070

And I enter "Testchain=YES_PLEASE" in the editor 00:00:00.004

And I click on "Create Configuration File" 00:00:00.701

Then I should see a "Revision 1 of /etc/action-chain.cnf from channel Action Chain Channel" text 00:00:00.098

And I should see a "Update Configuration File" button 00:00:00.018

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Download the configuration file from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.061

And I follow "Action Chain Channel" 00:00:00.433

And I follow "List/Remove Files" 00:00:00.368

And I follow "/etc/action-chain.cnf" 00:00:00.405

And I follow "Download File" 00:00:00.209

And I wait until file "/tmp/downloads/action-chain.cnf" exists on "localhost" 00:00:00.167

Then file "/tmp/downloads/action-chain.cnf" should contain "Testchain=YES_PLEASE" on "localhost" 00:00:00.345

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.597

When I follow "Configuration" in the content area 00:00:00.074

And I follow "Manage Configuration Channels" in the content area 00:00:00.087

And I follow first "Subscribe to Channels" in the content area 00:00:00.063

And I check "Action Chain Channel" in the list 00:00:00.056

And I click on "Continue" 00:00:00.508

And I click on "Update Channel Rankings" 00:00:00.789

Then I should see a "Channel Subscriptions successfully changed for" text 00:00:00.073

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a configuration file deployment to the action chain on Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.118

And I follow "Action Chain Channel" 00:00:00.527

And I follow "Deploy Files" in the content area 00:00:00.067

And I click on "Deploy All Files" 00:00:00.705

And I check the "sle_minion" client 00:00:00.059

And I click on "Confirm & Deploy to Selected Systems" 00:00:00.649

And I check radio button "schedule-by-action-chain" 00:00:10.062

And I click on "Deploy Files to Selected Systems" 00:00:00.842

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.074

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add apply highstate to action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.649

When I follow "States" in the content area 00:00:00.070

And I check radio button "schedule-by-action-chain" 00:00:10.081

And I click on "Apply Highstate" 00:00:00.061

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a reboot action to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:02.057

When I follow first "Schedule System Reboot" 00:00:00.384

And I check radio button "schedule-by-action-chain" 00:00:10.078

And I click on "Reboot system" 00:00:02.327

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.099

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

When I follow "Details" in the content area 00:00:00.081

And I follow "Remote Command" in the content area 00:00:00.068

And I enter as remote command this script in

#!/bin/bash
touch /tmp/action_chain_one_system_done

00:00:00.072

And I check radio button "schedule-by-action-chain" 00:00:10.071

And I click on "Schedule" 00:00:00.057

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.080

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Verify the action chain list on Salt minion

When I follow "Schedule" 00:00:00.331

And I follow "Action Chains" 00:00:00.332

And I follow "salt_minion_action_chain" 00:00:00.694

Then I should see a "1. Apply patch(es) andromeda-dummy-6789 on 1 system" text 00:00:00.082

And I should see a "2. Remove milkyway-dummy from 1 system" text 00:00:00.081

And I should see a "3. Install or update virgo-dummy on 1 system" text 00:00:00.082

And I should see a text like "4. Deploy.*/etc/action-chain.cnf.*to 1 system" 00:00:00.082

And I should see a "5. Apply Highstate" text 00:00:00.082

And I should see a "6. Reboot 1 system" text 00:00:00.076

And I should see a "7. Run a remote command on 1 system" text 00:00:00.076

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Check that a different user cannot see the action chain for Salt minion

Given I am authorized as "testing" with password "testing" 00:00:02.477

When I follow "Schedule" 00:00:00.961

And I follow "Action Chains" 00:00:00.306

Then I should not see a "salt_minion_action_chain" link 00:00:00.007

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Execute the action chain from the web UI on Salt minion

Given I am authorized for the "Admin" section 00:00:02.362

When I am on the Systems overview page of this "sle_minion" 00:00:01.988

And I follow "Schedule" 00:00:00.279

And I follow "Action Chains" 00:00:00.265

And I follow "salt_minion_action_chain" 00:00:00.317

And I click on "Save and Schedule" 00:00:00.061

Then I should see a "Action Chain salt_minion_action_chain has been scheduled for execution." text 00:00:00.903

When I wait for "virgo-dummy" to be installed on "sle_minion" 00:00:29.770

And I wait at most 300 seconds until file "/tmp/action_chain_one_system_done" exists on "sle_minion" 00:04:05.354

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Create a custom action chain for the Salt minion

When I create an action chain with label "salt_minion_action_chain_to_delete" via API 00:00:01.085

And I follow the left menu "Schedule > Action Chains" 00:00:00.079

Then I should see a "salt_minion_action_chain_to_delete" text 00:00:00.073

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add a remote command to the action chain on Salt minion

Given I am on the Systems overview page of this "sle_minion" 00:00:01.722

When I follow "Remote Command" 00:00:00.512

And I enter as remote command this script in

#!/bin/bash
uptime

00:00:00.057

And I check radio button "schedule-by-action-chain" 00:00:10.066

And I click on "Schedule" 00:00:00.513

Then I should see a "Action has been successfully added to the Action Chain" text 00:00:00.085

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Delete the action chain for Salt minion

When I follow "Schedule" 00:00:00.341

And I follow "Action Chains" 00:00:00.276

And I follow "salt_minion_action_chain_to_delete" 00:00:00.392

And I follow "Delete Action Chains" in the content area 00:00:00.079

And I click on "Delete" 00:00:00.547

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Downgrade again repositories to lower version on Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:03.023

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:01.861

And I install package "milkyway-dummy" on this "sle_minion" without error control 00:00:02.123

And I install old package "andromeda-dummy-1.0" on this "sle_minion" 00:00:02.770

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

When I refresh packages list via spacecmd on "sle_minion" 00:00:10.210

And I wait until refresh package list on "sle_minion" is finished 00:01:19.367

Then spacecmd should show packages "milkyway-dummy andromeda-dummy-1.0" installed on "sle_minion" 00:00:07.508

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Ensure again the errata cache is computed before testing on Salt minion

When I follow the left menu "Admin > Task Schedules" 00:00:00.143

And I follow "errata-cache-default" 00:00:01.382

And I follow "errata-cache-bunch" 00:00:01.284

And I click on "Single Run Schedule" 00:00:01.263

Then I should see a "bunch was scheduled" text 00:00:00.277

And I wait until the table contains "FINISHED" or "SKIPPED" followed by "FINISHED" in its first rows 00:00:06.650

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Add operations to the action chain via API for Salt minions

Given I want to operate on this "sle_minion" 00:00:01.037

When I create an action chain with label "salt_minion_api_chain" via API 00:00:01.118

And I add a package install to the action chain via API 00:00:02.034

And I add a package removal to the action chain via API 00:00:02.150

And I add a package upgrade to the action chain via API 00:00:02.094

And I add the script "exit 1;" to the action chain via API 00:00:00.988

And I add a system reboot to the action chain via API 00:00:00.973

Then I should be able to see all these actions in the action chain via API 00:00:00.941

+ Show Info

Running actions:
	- System reboot
	- Package Install/Upgrade
	- Package Removal
	- Package Install/Upgrade
	- Run an arbitrary script

When I remove each action within the chain via API 00:00:05.877

+ Show Info

	- Removed "System reboot" action
	- Removed "Package Install/Upgrade" action
	- Removed "Package Removal" action
	- Removed "Package Install/Upgrade" action
	- Removed "Run an arbitrary script" action

Then the current action chain should be empty 00:00:00.954

And I delete the action chain via API 00:00:00.932

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Run an action chain via API on Salt minion

Given I want to operate on this "sle_minion" 00:00:01.034

When I create an action chain with label "salt_minion_multiple_scripts" via API 00:00:01.046

And I add the script "echo -n 1 >> /tmp/action_chain.log" to the action chain via API 00:00:01.046

And I add the script "echo -n 2 >> /tmp/action_chain.log" to the action chain via API 00:00:00.985

And I add the script "echo -n 3 >> /tmp/action_chain.log" to the action chain via API 00:00:00.958

And I add the script "touch /tmp/action_chain_done" to the action chain via API 00:00:00.954

Then I should be able to see all these actions in the action chain via API 00:00:00.941

+ Show Info

Running actions:
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script
	- Run an arbitrary script

When I schedule the action chain via API 00:00:01.150

And I wait until there are no more action chains listed via API 00:00:01.191

And I wait until file "/tmp/action_chain_done" exists on "sle_minion" 00:00:04.052

Then file "/tmp/action_chain.log" should contain "123" on "sle_minion" 00:00:00.858

When I wait until there are no more scheduled actions listed via API 00:00:00.961

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove Salt minion from configuration channel

When I follow the left menu "Configuration > Channels" 00:00:00.166

And I follow "Action Chain Channel" 00:00:00.518

And I follow "Systems" in the content area 00:00:00.069

And I check the "sle_minion" client 00:00:00.065

And I click on "Unsubscribe systems" 00:00:00.642

Then I should see a "Successfully unsubscribed 1 system(s)." text 00:00:00.063

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove configuration channel for Salt minion

When I follow the left menu "Configuration > Channels" 00:00:00.064

And I follow "Action Chain Channel" 00:00:00.488

And I follow "Delete Channel" 00:00:00.296

And I click on "Delete Config Channel" 00:00:00.495

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

When I remove package "andromeda-dummy" from this "sle_minion" without error control 00:00:01.765

And I remove package "virgo-dummy" from this "sle_minion" without error control 00:00:00.874

And I remove package "milkyway-dummy" from this "sle_minion" without error control 00:00:01.754

And I disable repository "test_repo_rpm_pool" on this "sle_minion" without error control 00:00:00.482

@skip_if_github_validation @sle_minion @scope_action_chains

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

When I run "rm -f /tmp/action_chain.log" on "sle_minion" without error control 00:00:00.438

And I run "rm -f /tmp/action_chain_done" on "sle_minion" without error control 00:00:00.413

And I run "rm -f /etc/action-chain.cnf" on "sle_minion" without error control 00:00:00.429

And I run "rm -f /tmp/action_chain_one_system_done" on "sle_minion" without error control 00:00:00.415

@skip_if_github_validation @sle_minion @scope_action_chains

Feature: 0063 - Action chains on Salt minions

Scenarios

Scenario: Log in as admin user

Scenario: Pre-requisite: downgrade repositories to lower version on Salt minion

Scenario: Pre-requisite: refresh package list and check installed packages after downgrade on SLE minion

Scenario: Pre-requisite: wait until downgrade is finished on SLE minion

Scenario: Pre-requisite: ensure the errata cache is computed before testing on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a patch installation to the action chain on Salt minion

Scenario: Add a package removal to the action chain on Salt minion

Scenario: Add a package installation to an action chain on Salt minion

Scenario: Create a configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file to configuration channel for testing action chain on Salt minion

Scenario: Download the configuration file from configuration channel

Scenario: Subscribe system to configuration channel for testing action chain on Salt minion

Scenario: Add a configuration file deployment to the action chain on Salt minion

Scenario: Add apply highstate to action chain on Salt minion

Scenario: Add a reboot action to the action chain on Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Verify the action chain list on Salt minion

Scenario: Check that a different user cannot see the action chain for Salt minion

Scenario: Execute the action chain from the web UI on Salt minion

Scenario: Create a custom action chain for the Salt minion

Scenario: Add a remote command to the action chain on Salt minion

Scenario: Delete the action chain for Salt minion

Scenario: Downgrade again repositories to lower version on Salt minion

Scenario: Refresh package list and check installed packages after second downgrade on SLE minion

Scenario: Ensure again the errata cache is computed before testing on Salt minion

Scenario: Add operations to the action chain via API for Salt minions

Scenario: Run an action chain via API on Salt minion

Scenario: Cleanup: remove Salt minion from configuration channel

Scenario: Cleanup: remove configuration channel for Salt minion

Scenario: Cleanup: remove packages and repository used in action chain for Salt minion

Scenario: Cleanup: remove temporary files for testing action chains on Salt minion

Scenario: Cleanup: remove downloaded files